Gps Receiver Gm 158 Usb Driver

 admin



Setting Up Your Serial-to-USB Adapter

The GM-210 is a small mouse type antenna receiver with about two and a half metres of cable ending in a PS/2 type female connector. The Y type adapter cable has a PS/2 male connector at one end and splits into (in most cases) a suitable lead to the PDA and a lead to a cigarette lighter charger plug. AmbiCom's GPS Navigation USB Receiver is the Global Positioning System Receiver for your Microsoft Windows laptop. In addition to AmbiCom Navigator Pro mapping software, you can also use other forms of navigation software in conjunction with AmbiCom's Navigation USB Receiver. Remove GPS USB Driver If you want to update the USB driver, you should remove existing driver and install new one. Step 1: Remove GPS USB driver by double-clicking the icon show in Figure-15. A dialog window shown in Figure-16 will be pop up. Figure 15: GPS USB Driver Remove Icon Step 2: Click 'OK' button Figure 16: Remove Driver Screen Step 3. Here is a photograph of the EverMore GM-R700 GPS Receiver, as you can see it consists of a small unit (4cm x 5cm) that houses the GPS receiver and an RS232 to USB convertor with a flying USB lead on it. EverMore GM-R700 GPS Receiver. The Holux USB GPS receiver GM-210 is quite old now, and I suspect you may have difficult, if not impossible, time locating driver software compatible with Ubuntu 8.10. 8 data bits, the device like to tracking signal. Do you are necessary to feed a mystery. The HOLUX GM-210 GPS receiver gpslim user's guide 18 pages.

When connected to a GPS, Offshore Navigator Lite provides real-time, on-the-water positioning, among its features.

Gps

All USB-to-Serial adapters require software drivers to operate. Thus, a software driver CD-ROM accompanied your adapter. If the CD was missing or has been lost, download the driver from the manufacturer's website.

  • Close all running programs before beginning the Installation
  • On most operating systems, you have to disable your virus protection program in order to install the USB-to- Serial adapter software driver.

Gps Receiver Gm 158 Usb Driver Updater

Determining the COM Port of a USB to Serial Adapter

There are a number of Serial-to-USB adapters that do two things:

  • They physically connect a serial cable to a USB port.
  • They have software drivers that create a Virtual COM Port.

A Virtual COM Port is a setting within the Windows operating system that allows software products to connect to USB devices using traditional serial (COM Port) connections. While the 'plug' on the back of the computer remains USB, the software (such as Maptech's® Offshore Navigator Lite) connects to it as a traditional serial COM Port. It is the number of this Virtual COM Port that is needed for Maptech's® software to connect to the GPS device attached in this fashion.

Determining the COM Port Number of a Virtual COM Port

Once the driver is installed, you will need to find out the number of the Virtual COM Port that has been set up. In the majority of cases, you can determine the Virtual COM Port by following these steps:

1.Open Device Manager:

Gps Receiver Gm 158 Usb Driver

(Windows Vista & Windows 7) Under the Start menu, Right-click Computer, and choose Manage.

(Windows XP) On the Start menu, Right-click My Computer, and choose Manage.

Click Device Manager on the left.

2. In the Device Manager list, look in Ports and find the Virtual COM Port, which was created by the USB driver.

i.e.USB to Serial Port (COM #).

In the example below, it is COM 4:

Gps Receiver Gm 158 Usb Driver

Make note of this COM Port number, and which USB Port that you have the GPS plugged into. Close Device Manager.

Finishing the Job: Reading the GPS Stream in Offshore Navigator Lite

Now you need to 'tell' Offshore Navigator Lite where to find the GPS Signal.

1. From the 'Vessel/GPS' menu, choose 'Setup', 'GPS Setup Wizard'.

2. Follow the on-screen instructions.

Note: If the GPS Wizard can not detect the GPS, follow these steps--
Select 'Setup', 'GPS' from the 'Vessel/GPS' menu.
Set the 'Manufacturer' to 'NMEA - generic,' Set the unit to '0183'.
Check the box to set GPS ON
Specify the COM port determined during the above test.
Next, click Port Settings and verify the Baud Rate.

Receiver

GPS Models and respective Baud Rates:
Holux GR-213 USB GPS = Baud Rate 4800
iGPS M-Pro USB GPS = Baud Rate 9600
iGPS GM-2 USB GPS = Baud Rate 9600
Zenstar III USB GPS = Baud Rate 4800

3. Once the signal is detected,

Usb Gps Receiver

From the 'Vessel/GPS' menu, choose 'Position from GPS,' then click 'Follow Vessel' in the lower left-hand corner of the chart window.

For help with the above installations and other support, please call 508-990-9020 or send an e-mail to support@Maptech.com.

Windows 10 Usb Gps Receiver

Related posts:

Gps Receiver Gm 158 Usb Driver Download

For help with the above installations and other support, please call 508-990-9020 or send an e-mail to support@Maptech.com.